Nein, Herstellertool habe ich noch nicht verwendet.
Aber ich habe neue Erkenntnisse :-)
garted: Unallocated
top findet kein swap
fdisk /dev/hda:
|
Quellcode
|
1
|
Unable to read /dev/hda
|
fdisk /dev/hda1: (/swap?):
|
Quellcode
|
1
|
Unable to read /dev/hda1
|
fdisk /dev/hda2: (/ ?):
|
Quellcode
|
1
2
3
|
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel...
...The number of cylinders for this disk is set to 2286.
There is nothing wrong with that, but this is larger than 1024,...
|
dann p, um die Partitions-Tabelle anzuzeigen:
|
Quellcode
|
1
2
3
4
5
|
Disk /dev/hda2: 18.8 GB, 18802990080 bytes
255 heads, 63 sectors/track, 2286 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
|
fdisk /dev/hda4 ( /home): gleiche Meldung wie bei hda2, nur ist die Zylinderzahl 9648.
Dann p:
|
Quellcode
|
1
2
3
|
Disk /dev/hda4: 79.3 GB, 79357501440 bytes
255 heads, 63 sectors/track, 9648 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
|
Dazu ist zu sagen, daß die Größe von /home stimmen müßte, 80 GB, während die 18.8 GB von / nicht stimmen. Das müßten ~10 GB sein.
Auf /home kann ich von ubuntu-live problemlos zugreifen, auf / nicht (dachte aber, daß das mit knoppix gegangen ist - muß ich nochmal testen. Ein paar Sachen aus /etc hätt ich doch auch ganz gern noch gesichert.
Imho ist also die Partitions-Tabelle kaputt oder sowas. Kann das sein? Ich kenn mich mit sowas leider null aus. Kann man das reparieren, wenn ja, wie?
Danke und Gruß
Jochen
Edith sagt:
Knoppix kann mit der swap-Partition auch nichts anfangen, auch nicht einhängen. Wird aber auf dem Desktop angezeigt.
hda2, also / läßt sich einhängen, ist auch alles vorhanden. Fstab, xorg.conf... sind gesichert.
Btw. Haedware-Information von ubuntu-live erkennt die Platte korrekt als Samsung SP1203N, aber nur hda4 (home)