Mittwoch, 23. Mai 2012, 17:53

Du bist nicht angemeldet.



ezazazel

The Supporter

  • »ezazazel« ist der Autor dieses Themas

Beiträge: 719

Ubuntu: 11.10

Kernel: 3.0.0-14-generic

Architektur: 32-bit

  • Private Nachricht senden

1

Donnerstag, 3. Januar 2008, 20:33

1199:6832 Sierra Wireless, Inc. MC8780 zum Laufen bringen

Also ich habe im Notebook eine
1199:6832 Sierra Wireless, Inc. MC8780 Karte welche ich nicht zum Laufen bringe.

Quellcode

1
lsusb
liefert

Zitat

Bus 007 Device 001: ID 0000:0000
Bus 006 Device 005: ID 046d:09b2 Logitech, Inc.
Bus 006 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 1199:6832 Sierra Wireless, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 08ff:2580 AuthenTec, Inc.
Bus 001 Device 003: ID 0c24:000f Taiyo Yuden
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000


nach dem Laden von

Quellcode

1
sudo modprobe sierra

Zitat

[ 636.580000] usbcore: registered new interface driver usbserial_generic
[ 636.580000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 636.584000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port)
[ 636.584000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port)
[ 636.588000] usbcore: registered new interface driver sierra
[ 636.588000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.0.6


Quellcode

1
wvdialconf
liefert

Zitat

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

WvModem<*1>: Cannot set information for serial port.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2
WvModem<*1>: Cannot set information for serial port.
ttyS3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?


Quellcode

1
dmesg |grep Sierra
zeigt

Zitat

dmesg |grep Sierra
[ 636.584000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (1 port)
[ 636.584000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB modem (3 port)
[ 636.588000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.0.6


Bin mit meinem Latein am Ende. Wer weiß Rat?
Si non confectus, non reficiat (If it's not broken, don't fix it)
Shuttle XPC SD39P2; Intel Core2Duo 6420; Samsung T166 SATA II 3,5" 500GB; Gainward Bliss 8600GT PCX SilentFx, Cinergy T USB XS hybrid && MSI Wind Nettop && Toshiba Portege M700 && Acer Aspire One

ezazazel

The Supporter

  • »ezazazel« ist der Autor dieses Themas

Beiträge: 719

Ubuntu: 11.10

Kernel: 3.0.0-14-generic

Architektur: 32-bit

  • Private Nachricht senden

2

Samstag, 5. Januar 2008, 01:15

So hier nun die Lösung:

Quellcode

1
sudo gedit /etc/modules


wird um

Zitat

usbserial vendor=0x1199 product=0x6832
sierra


erweitert.
Danach wird das Modem erkannt.

Überprüfen kann man das mit

Quellcode

1
wvdialconf


Erkannt werden 3 Schnittstellen, ttyUSB2 ist jene die funktionert.

Um yesss Wertkarten zu verwenden stellt man Gnome-ppp wie folgt ein:

Zitat

Typ: USB-Modem Geschwindigkeit: 3774000
Telefonleitung: TON
Lautstärke AUS
Telefonnummern: *99#
Initialisierungsstring: at+cgdcont=1,"ip","web.yesss.at"
keine VORWAHL

Netzwerk:
Auf Wählton warten DEAKTIVIERT
Dynamische IP-Adresse und Automatischer DNS

Optionen:
Verbindung: Verbindung automatisch wiederherstellen AKTIV
Ignoriere Terminalstrings AKTIV
Wartezeit: 0
Si non confectus, non reficiat (If it's not broken, don't fix it)
Shuttle XPC SD39P2; Intel Core2Duo 6420; Samsung T166 SATA II 3,5" 500GB; Gainward Bliss 8600GT PCX SilentFx, Cinergy T USB XS hybrid && MSI Wind Nettop && Toshiba Portege M700 && Acer Aspire One